segacdw is a program that records a CD image file created by a virtual CD system (command VCDBUILD) on a CD-R using a CD-R recorder. This command is launched from a system prompt.
install
Hardware installation
Connect the CD-R recorder YAMAHA CDE / CDR100 (CDE100 is the model name of the CDR100 with the housing) to the host machine via SCSI. For details on the connection method, refer to the CDR100 manual.
If you set the SCSI ID of CDR100 to 5, you do not need to set the SCSI ID in the argument of the command segacdw each time.
Software installation
Copy the executable file segacdw from the floppy disk distribution media to the host's hard disk. Set the path if necessary.
