7. message

7.1 Error message

If an error occurs, a message will be output in the following format.

Script file name (line number): Error message [Error code]

Error list

• Wrong command option [-2]
• There is no script file [-3]
• The program cannot be executed [-4]
• Script syntax error [-5]
• Insufficient string area [-6]
• Insufficient DOS file information area [-7]
• Insufficient ISO file information area [-8]
• Insufficient sector table area [-9]
• There are too many indexes [-10]
• There are too many tracks [-11]
• Double defined macro [-12]
• An undefined macro was used [-13]
• Incorrect volume type [-14]
• There are too many characters per line [-15]
• There are no files in the track [-18]
• System area is too large [-19]
• No PVD [-20]
• Unable to open file [-21]
• Unable to create file [-22]
• Directory hierarchy is too deep [-23]
• Unable to allocate memory [-24]
• The disk type is incorrect [-25]
• Incorrect track type [-26]
• There is no lead-in area [-27]
• No track defined [-28]
• Area overlaps with other files [-29]
• Incorrect source type [-30]
• Incorrect data type [-31]
• Incorrect parameters [-32]
• Incorrect time specification [-33]
• Incorrect date or time [-34]
• The attribute specification is incorrect [-35]
• The file name of the ISO file is incorrect [-36]
• The directory name is incorrect [-37]
• The ISO file has been double-defined [-38]
• Multiple source files are defined within a file block [-39]
• This command can only be defined on mode 2 tracks [-40]
• This command cannot be defined within this block [-41]
• Both BeginTime and EndTime cannot be defined in the same block [-42]
• Too many file interleaves [-43]
• Too many channel interleaves [-44]
• Multiple files are defined in the file interleaved block [-45]
• Multiple source files are defined in the channel block [-46]
• The file number is incorrect [-47]
• Incorrect channel number [-48]
• Duplicate file number [-49]
• Duplicate channel number [-50]
• BitRate is not defined [-51]
• BitRate parameters are incorrect [-52]
• Duplicate stream number [-53]
• Too many MPEG element streams [-54]
• The MPEG video format is incorrect [-55]
• The MPEG audio format is incorrect [-56]
• Cannot be used in on-the-fly mode [-60]
• Missing subcommand file [-61]

7.2 Warning message

If it is not a fatal error and does not significantly interfere with disk image creation, display this as a warning message and continue working.
(Even if a warning message is displayed, it is preferable to investigate the cause and take countermeasures.)
The warning message is output in the following format.

Script file name (line number): Warning Warning message [Warning code]

Warning list

• Total bitrate exceeds sector rate [-1]
• The coded bit rate is exceeded [-2]