2.3 Function list

		function	Seki several people	number
Sound system boot		Sound system boot	SND_Init	1
interrupt		Interrupt enable setting	SND_SET_ENA_INT	2
		Get interrupt permission	SND_GET_ENA_INT	3
		Interrupt factor setting	SND_SET_FCT_INT	Four
		Interrupt reset	SND_RESET_INT	Five
Ready to play		Sound data transfer	SND_MoveData	6
Sound control	common	Change sound area map	SND_ChgMap	7
		DSP canceled	SND_StopDsp	8
		Stop sounding all sounds	SND_OffAllSound	9
		Overall volume setting	SND_SetTlVl	Ten
		Effect change	SND_ChgEfct	11
		Mixer change	SND_ChgMix	12
		Mixer parameter change	SND_ChgMixPrm	13
		Hardware check	SND_ChkHard	14
	sequence	Sequence start	SND_StartSeq	15
		Sequence abort	SND_StopSeq	16
		Sequence pause	SND_PauseSeq	17
		Release sequence suspension	SND_ContSeq	18
		Sequence volume setting	SND_SetSeqVl	19
		Sequence PAN setting	SND_SetSeqPan	20
		Tempo change	SND_ChgTempo	twenty one
		MIDI direct control	SND_CtrlDirMidi	twenty two
	PCM	PCM start	SND_StartPcm	twenty three
		PCM canceled	SND_StopPcm	twenty four
		PCM change	SND_ChgPcm	twenty five
	CD	Volume analysis started	SND_StartVlAnl	26
		Volume analysis canceled	SND_StopVlAnl	27
		CD-DA Level setting	SND_SetCdDaLev	28
		CD-DA Pan settings	SND_SetCdDaPan	29
Get status	sequence	Get sequence status	SND_GetSeqStat	30
		Pronunciation control number Playback position acquisition	SND_GetSeqPlayPos	31
	PCM	Get PCM execution address	SND_GetPcmPlayAdr	32
		PCM address update interrupt status acquisition	SND_GET_INT_STAT	33
	CD	Acquisition of stereo volume for the entire analysis	SND_GetAnlTlVl	34
		Acquisition of stereo volume by analysis frequency band	SND_GetAnlHzVl	35
others		Sound control settings	SND_SET_SND_CTRL	36
		Get sound control	SND_GET_SND_CTRL	37

		function	Seki several people	number
3D sound		QSOUND parameter set	SND_SetQSound	1
		YAMAHA 3D parameter set	SND_Set3D_Stat	2
		YAMAHA 3D localization initialization	SND_Set3D_Init	3