★ HARDWARE Manual ★ SCU User's Manual
▲ Back ｜ Forward ▼
SCU User's Manual / Chapter 4 DSP Control END command
List | ▲ Back | Next ▼ | Assembler END
Stop
- Operation content
- Stop the program.
- Descriptive formula
- label: END
- Instruction code
| 31 | 30 | 29 | 28 | 27 | | | | | | | | | | | | | | | | | | | | | | | | | | | 0 |
| 1 | 1 | 1 | 1 | 0 | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − |
- flag
- EX; 0.
- remarks
List | ▲ Back | | Assembler ENDI
The end of the program
- Operation content
- Stop the program and set the E flag (program end interrupt flag).
- Descriptive formula
- label: ENDI
- Instruction code
| 31 | 30 | 29 | 28 | 27 | | | | | | | | | | | | | | | | | | | | | | | | | | | 0 |
| 1 | 1 | 1 | 1 | 1 | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − | − |
- flag
- It becomes E; 1.
- EX; 0.
- remarks
- After the processing is completed, the PC will execute LOP + 1 times and exit.
▲ Back ｜ Forward ▼
★ HARDWARE Manual ★ SCU User's Manual
Copyright SEGA ENTERPRISES, LTD., 1997