7. error

If an error occurs, a message will be output in the following format.

Subcommand file name (line number): Error message [Error code]

Error list

• Drive is not connected
• Drive not ready
• There is something wrong with the disc
• There is an error in the subcommand
• File does not exist on disk
• Directory does not exist on disk
• File does not exist under DOS
• File size is too large
• The file has already been designated for editing
• The specified file is interleaved
• The file already exists on disk
• Directory cannot be updated
• Addendum Unable to create image file
• The disk is full
• No more writes to this disc
• Transfer speed is too slow
• Gap size is too small
• There is something wrong with the TOC file
• Unable to access the file
• Too many subdirectories
• There is something wrong with the DSK file
• The contents of the disc are invalid
• Out of memory
• A read error has occurred
• A communication error has occurred
• A hardware error has occurred
• Disk is empty

▲ List

Drive not connected [fe02] [fe82]
Drive is not connected

Origin

The CD-R drive is not connected to SCSI.

measures

Make sure that the connection and ID are not duplicated.

▲ List

The drive is not ready [fe04] [fe28] [fe50] [fe5a] [fea3] [feb7]
Drive is not ready

Origin

CD-R drive It does not become a state.

measures

Make sure the disc is set correctly.

▲ List

There is something wrong with the disc [fd0b] [fe31] [fe33] [fea9] [feaf] [feb2] [feb3]
Something wrong with the disc

The cause CD-R disc is abnormal.

Countermeasure Check the standard of the CD-R disc.

▲ List

There is an error in the subcommand [fd12]
Bad Sub-command

Origin

An unsupported subcommand was specified.

measures

Check the subcommand.

▲ List

File does not exist on disk [fd15]
File does not exist on the disc

Origin

The specified file does not exist on the CD-R disc.

measures

Specify the correct file name with the full path.

▲ List

Directory does not exist on disk [fd14]
Directory does not exist on the disc

Origin

The specified directory does not exist on the CD-R disc.

measures

Specify the correct file name with the full path.

▲ List

File does not exist under DOS [fd07] [fd13]
File does not exist on DOS

Origin

The specified file does not exist in DOS.

measures

Check the file name.

▲ List

File size is too large [fd1a]
File size is too huge

Origin

The size of the file specified for the system area is too large.

measures

Reduce the file size to 32768 bytes or less.

▲ List

The file has already been designated for editing [fd17]
File is specified already

Origin

The subcommand was issued twice for the same file.

measures

Check the subcommand.

▲ List

The specified file is interleaved [fd1c]
Specified file is interleaved

Origin

Issued an unexecutable subcommand to an interleaved file.

measures

Try the disk build again.

▲ List

File already exists on disk [fd16]
Same file name exists on the disc already

Origin

The file you tried to add already exists on the CD-R disc.

measures

Rename or replace the file.

▲ List

Directory cannot be updated [fd1b]
Can't renew the directory

Origin

A subcommand was specified for the directory.

measures

Full update.

▲ List

Addendum Unable to create image file [fd1d]
Can't create the image file for the additional description

Origin

Unable to create file in the specified working directory.

measures

Check your working directory. Check the free space on the hard disk.

▲ List

The disk is full [feaa] [feb0] [feb4]
Disc is full

Origin

The write position has reached the end of the disk.

measures

Use a new disc.

▲ List

No more writes to this disc [fd18]
Can't write on this disc any more

Origin

An attempt was made to write to a used disc in master mode.
Or, I tried to write to the following disc.

• Disc with 99 tracks written

• Discs written in master mode (disc at once)

• Disk with confirmed final session

• Disk with unfixed session

measures

Use a new disc

▲ List

Transfer speed is too slow [fead]
Forwarding Speed is too slow

Origin

The data buffer on the CD-R drive became empty during writing.

measures

Slow down the writing speed.
Use disk cache.
Free up more conventional memory by reducing device drivers.

▲ List

Gap size is too small [fd02] [fd03]
Gap size is too small

Origin

The gap between the tracks is too small.

measures

225 sectors before the Mode2 track, 150 sectors or more in other cases.

▲ List

There is an error in the TOC file [fd04] [fd05] [fd06] [fd0a] [fd10]
Something wrong with the TOC file

Origin

There is a mistake in the TOC file.

measures

Use the correct TOC file.

▲ List

Unable to access the file [fd08]
Can't access to the file

Origin

File access failed.

measures

Check if files and directories can be accessed normally.

▲ List

Too many subdirectories [fd0d]
Too many sub-directories

Origin

There are too many subdirectories.

measures

Reduce the total number of subdirectories to 1024 or less.

▲ List

There is something wrong with the DSK file [fd0c] [fd0e] [fd0f]
Something wrong with the DSK file

Origin

The contents of the DSK file do not comply with the ISO9660 standard.

measures

Use the correct DSK file.

▲ List

The contents of the disc are invalid [fd19] [fe21]
Illegal disc contents

Origin

The contents of the CD-R disc do not comply with the ISO9660 standard.

measures

Full update.

▲ List

Out of memory [fd11] [fec1]
Not enough memory

Origin

The memory capacity required for execution cannot be secured.

measures

Free up more conventional memory by reducing device drivers.

▲ List

A read error has occurred [fe11] [fe17] [fe18] [fe32] [fe47] [fe57] [fea0] [fea2]
Read Error Occurred [feab] [feac] [feae]

Origin

A disk read error has occurred.

measures

Check the CD-R disc.

▲ List

A communication error has occurred [fd00] [fe00]
Communication Error Occurred

Origin

An error occurred during communication.

measures

Check the connection and cable.

▲ List

A hardware error has occurred [fe08] [fe09] [fe15] [fe29] [fe40] [fe42] [fe44]
Hardware Error Occurred [fe53] [fe83] [fec0]

Origin

An error has occurred in the CD-R drive.

measures

Check the CD-R drive.

▲ List

Disk is empty [feb1]
Disc is empty

Origin

I tried to add a difference to a blank disk.

measures

Replace with a disc that has been completely rewritten.